 |
 |
 |
|
Features
- The PG30 is a keypad operated, surface-mounted, microprocessor-controlled door alarm.
- PG30 Alarm to be battery operated, stand-alone, and not required to be hardwired.
- Alarm is activated when the magnetic field between the main unit and actuator is interrupted. Opening the door, removal of cover, r attempting to use a second magnet to defeat the device will activate the alarm.
- Alarm to have three security levels to allow for different requirements. Two passage code functions to allow for delayed entry, and one function activates alarm immediately when door is opened, and is deactivated by master code only.
- Alarm to have three siren choices, sweep, steady and pulse with two volume levels available.
- PG30 alarm has a 2-minute shutdown with automatic reset when function is activated.
- Alarm shall have an entry/exit delay to enable arming/disarming.
- Power is provided by a 9-volt alkaline battery.
- PG30 can allow for continuous power with the addition of an external power supply; multiple door monitoring with built-in external reed switches; and Form C relay output for remote monitoring and connection to fire/burglar alarm panel.
-
LED will flash once every four hours to indicate battery status. Unit will chirp and LED will flash once per minute to indicate the need for battery replacement.
-
DOES NOT INCLUDE THE OPTIONAL REMOTE KEYPAD (shown in picture)
|
|
|
 |
|
 |
|
|
|
View Cart
